Skip to content
Enterprise hardware · New & pre-owned supply
sales@aster-rackit.comEnglish / Global
Quote basket 0Configure system →
☰
PRODUCT FAMILY

Network adapters

Browse network adapters by manufacturer and exact identifier. This directory separates technical identity from commercial stock. Filter the evidence depth, compare recorded fields and carry a shortlist into your quotation draft.

Adapter optics staged for inspection
Adapter optics staged for inspection

Match the adapter form factor and software path

  1. Record adapter number, controller family, physical slot and bracket height.
  2. Distinguish PCIe, OCP, mezzanine and vendor-specific cards even when advertised port speeds match.
  3. Review firmware, drivers, operating system and transceiver requirements for the destination system.
  4. Include cables, optics and any required feature entitlement in the scope.
  5. Request both label and connector views. A generic networking photograph cannot identify the offered adapter.

Choose a manufacturer

Typical deployment contexts

Common project contexts where buyers request this network adapters. Contexts inform the inquiry — they are not compatibility claims.

01

Server network throughput upgrade

02

RDMA and storage fabric enablement

03

Adapter standardization rollout

Facility & handling reference

Technical shortlist

HPEmanufacturer part number
L09278-001-HIGH P

HPE L09278-001-HIGH P — Network adapters

includes
FULL HEIGHT ( HIGH PROFILE ) BRACKET ONLY - NO CABLES INCLUDED
card detail transfer rate
10GBASE-T ( 10GB/S )
protocol
ETHERNET

Source-listed identity · parameters unverified

View details →
Intelmanufacturer part number
G60071-003-HIGH P

Intel G60071-003-HIGH P — Network adapters

content includes
( 1 ) ONE INTEL ETHERNET SERVER ADAPTER I210-T1 WITH FULL HEIGHT ( HIGH PROFILE ) BRACKET - NO CABLES INCLUDED
performance transfer rate
10 / 100 / 1000MB/S ( 1GB/S )
protocol
ETHERNET

Source-listed identity · parameters unverified

View details →
Intelmanufacturer part number
I210T1BLK

Intel I210T1BLK — Network adapters

content includes
( 1 ) ONE INTEL ETHERNET SERVER ADAPTER I210-T1 WITH FULL HEIGHT ( HIGH PROFILE ) AND HALF HEIGHT ( LOW PROFILE ) BRACKETS - NO CABLES INCLUDED
performance transfer rate
10 / 100 / 1000MB/S ( 1GB/S )
protocol
ETHERNET

Source-listed identity · parameters unverified

View details →
Intelmanufacturer part number
I350T4G2P20

Intel I350T4G2P20 — Network adapters

content includes
( 1 ) ONE INTEL ETHERNET SERVER ADAPTER I350-T4 WITH FULL HEIGHT ( HIGH PROFILE ) AND HALF HEIGHT ( LOW PROFILE ) BRACKETS - NO CABLES INCLUDED
performance transfer rate
1GBASE-T ( 1GB/S )
protocol
ETHERNET

Source-listed identity · parameters unverified

View details →
HPEmanufacturer part number
647594-B21

HPE 647594-B21 — Network adapters

content includes
HPE 331T ADAPTER ONLY - NO CABLES INCLUDED
card detail transfer rate
1GBASE-T ( 1GB/S )
controller
BROADCOM BCM5719 BASED

Source-listed identity · parameters unverified

View details →
GIGABYTEmodel
CLN4121

GIGABYTE CLN4121 — Network adapters

Ports
1 x 10GBASE-T RJ45 LAN ports Supports 10Gb/s, 1Gb/s per port
Controller
Intel® X550-AT
Interface
PCIe x4 (Gen3 x4 bus)

Inherited technical record

View details →
GIGABYTEmodel
CLN4222

GIGABYTE CLN4222 — Network adapters

Ports
2 x 10GBASE-T RJ45 LAN ports Supports 10Gb/s, 1Gb/s per port
Controller
Intel® X550-AT2
Interface
PCIe x4 (Gen3 x4 bus)

Inherited technical record

View details →
GIGABYTEmodel
CLN4224

GIGABYTE CLN4224 — Network adapters

Ports
4 x 10GBASE-T RJ45 LAN ports Supports 10Gb/s, 1Gb/s per port
Controller
2 x Intel® X550-AT2
Interface
PCIe x8 (Gen3 x8 bus)

Inherited technical record

View details →
HPEmanufacturer part number
P51305-001

HPE P51305-001 — Network adapters

compatibility
HPE PROLIANT DL325 G11 ( GEN11 ) / DL360 G11 ( GEN11 ) / DL380 G11 ( GEN11 ) / DX380 G11 ( GEN11 )
content includes
( 1 ) ONE HP BROADCOM 5719 OCP 3.0 NIC - NO CABLES INCLUDED
performance transfer rate
1GBE ( 1GB/S )

Source-listed identity · parameters unverified

View details →
Supermicromanufacturer part number
AOC-STG-B2T-HIGH P

Supermicro AOC-STG-B2T-HIGH P — Network adapters

includes
SUPERMICRO 10GBASE-T 2P AOC WITH FULL HEIGHT ( HIGH PROFILE ) BRACKET ONLY - NO CABLES INCLUDED
card detail transfer rate
10GBASE-T ( 10GB/S )
protocol
ETHERNET

Source-listed identity · parameters unverified

View details →
ASUSmodel
PEB-10G/57840-2T

ASUS PEB-10G/57840-2T — Network adapters

Form factor
Low-profile Card
Dimensions
4.72 x 1.77 Inch
Controller
BCM 57840S

Inherited technical record

View details →
GIGABYTEmodel
CLN4312

GIGABYTE CLN4312 — Network adapters

Ports
2 x 1000BASE-T RJ45 LAN ports Supports 1Gb/s, 100Mb/s per port
Controller
Intel® I350-AM2
Interface
PCIe x4 (Gen2 x4 bus)

Inherited technical record

View details →
Evidence to request

Adapter label · Host slot connector · Ports · Bracket or carrier · Optics when included. No illustration identifies the exact offered unit.

Frequently asked questions

What does the Network adapters family cover?

Browse network adapters by manufacturer and exact identifier. This directory separates technical identity from commercial stock. Filter the evidence depth, compare recorded fields and carry a shortlist into your quotation draft.

What should I check before buying network adapters?

Key review points: Record adapter number, controller family, physical slot and bracket height.; Distinguish PCIe, OCP, mezzanine and vendor-specific cards even when advertised port speeds match.; Review firmware, drivers, operating system and transceiver requirements for the destination system..

What evidence should I request with a quotation?

Adapter label · Host slot connector · Ports · Bracket or carrier · Optics when included. No image identifies the exact offered unit.

01

Networking & security — the next decisions

Networking & security

Networking & security

Record port speeds, media type and uplink quantities.

This guide adds the decisions, documents and next steps that support this page.

Network equipment
Networking & security illustrative environment
02

Choose the right route

Routing & security

Specify interfaces, throughput test conditions and required software features.

Network planner

Optics & connectivity

Match connector, fiber, reach, wavelength and supported coding.

Network checklist
03

Details that change the configuration

Port map

Record port speeds, media type and uplink quantities.

Airflow & power

Match airflow direction, power supply and rack requirements.

Software entitlement

Request license and transferability details for the exact offer.

04

From requirement to handover

  1. 01

    Map endpoints

  2. 02

    Choose port & uplink plan

  3. 03

    Review optics & licenses

  4. 04

    Prepare deployment brief

A planning sequence, not a record of completed work.

05

Explore the relevant catalog

All manufacturers

Recorded catalog identities

Counts show records in the site catalog. They do not represent stock, available quantities or verified compatibility.

Snapshot: 2026-09-15

06

Compare the buying requirements

Networking & security comparison brief
DecisionRecord in your briefEvidence to retain
Port mapRecord port speeds, media type and uplink quantities.Complete identifier and source revision
Airflow & powerMatch airflow direction, power supply and rack requirements.Platform document or written clarification
Software entitlementRequest license and transferability details for the exact offer.Offered-unit details and agreed scope
Open the comparison workspace
07

Build your readiness checklist

Your preparation progress

Tick items as you prepare them. This is your personal checklist, not a hardware validation.

0 / 4 prepared0

Saved in this browser when local storage is available.

08

A closer look at the hardware

Networking & security — Spine Switch Cabling facility reference
Spine Switch Cabling Explore
Networking & security — Qsfp Transceiver Lineup facility reference
Qsfp Transceiver Lineup Explore
1 / 2

Reference-based generated scenes; actual-unit photos are available only through an explicit unit-specific request. Related models are separate catalog records, not substitutes for the item on this page.

09

Keep the supporting material together

Network checklist

Retain the supporting reference with your project brief.

Open resource
10

Turn the brief into the next step

Networking & security

Keep the requirement specific.

Port and uplink schedule drafted · Optics and cable ends identified · Airflow and PSU scope confirmed · Required software entitlement listed.