System planning
Start with the chassis and its documented dependencies.
System configuratorCompare evidence without inventing the blanks.
Select up to four identities. Matching a field does not establish replacement compatibility.
| Recorded field | PowerEdge XE9680Dell |
|---|---|
| Identity type | model |
| Evidence status | OEM fields reviewed · see remaining checks |
| OEM review · chassis | 6U rack; height 263.2mm |
| OEM review · cpu | Two Intel Xeon Scalable processors: 4th Gen up to 56 cores or 5th Gen up to 64 cores |
| OEM review · gpu layout | 8-GPU platforms listed: HGX H100, HGX H200, AMD MI300X or Intel Gaudi3 |
| OEM review · memory | 32 DDR5 RDIMM slots; maximum 4TB; up to 5600 MT/s with 5th Gen CPUs |
| OEM review · storage | Up to 8 2.5-inch SSDs or 16 E3.S NVMe; Gaudi3 limited to 8 2.5-inch NVMe |
| OEM review · power | 2800W Titanium redundant hot-swap; 200-240VAC or 240VDC |
| OEM review · network | Optional OCP 3.0 and dual-1GbE LOM |
| OEM review · management interface | iDRAC9; dedicated RJ45; Redfish |
| OEM review · pcie | Up to 10 Gen5 x16 slots; 8 with Gaudi3 |
Configuration & comparison — the next decisions
Configuration & comparison
Configuration & comparison
Define workload, capacity, constraints and growth needs.
This guide adds the decisions, documents and next steps that support this page.
System configurator
Choose the right route
Parts comparison
Keep identifiers and evidence side by side.
Compare recordsNetwork planning
Build a port, optics and cable schedule.
Network plannerDetails that change the configuration
Requirements
Define workload, capacity, constraints and growth needs.
Dependencies
Check component support, physical fit, power and firmware.
Review output
Export a reviewable requirement or quotation draft.
From requirement to handover
- 01
Set project constraints
- 02
Build candidate configuration
- 03
Review dependencies
- 04
Prepare RFQ
A planning sequence, not a record of completed work.
Explore the relevant catalog
All manufacturers
Recorded catalog identities
Counts show records in the site catalog. They do not represent stock, available quantities or verified compatibility.
Snapshot: 2026-09-15
Compare the buying requirements
| Decision | Record in your brief | Evidence to retain |
|---|---|---|
| Requirements | Define workload, capacity, constraints and growth needs. | Complete identifier and source revision |
| Dependencies | Check component support, physical fit, power and firmware. | Platform document or written clarification |
| Review output | Export a reviewable requirement or quotation draft. | Offered-unit details and agreed scope |
Build your readiness checklist
Your preparation progress
Tick items as you prepare them. This is your personal checklist, not a hardware validation.
Saved in this browser when local storage is available.
A closer look at the hardware
Reference-based generated scenes; actual-unit photos are available only through an explicit unit-specific request. Related models are separate catalog records, not substitutes for the item on this page.
Keep the supporting material together
System configurator
Continue the relevant directory or service flow.
Open resourceCompare records
Use the connected tool to develop the requirement.
Open resourceNetwork planner
Retain the supporting reference with your project brief.
Open resourceTurn the brief into the next step
Configuration & comparison
Keep the requirement specific.
Workload requirements captured · Candidate BOM recorded · Open compatibility questions listed · Reviewer and next action assigned.