Drive condition
Ask for the available health counters, operating hours and reported error information for the offered lot.
Seagate · Exos X24
ST12000NM001H
Manufacturer model
Seagate Exos X24 12TB 3.5-inch SATA 6Gb/s 7200 RPM enterprise hard drive, Self-Encrypting Drive (SED).
Product details
Technical specifications.
- Manufacturer
- Seagate
- Manufacturer model
- ST12000NM001H
- Capacity
- 12 TB
- Interface
- SATA
- Interface link rate
- 6 Gb/s
Interface link rate is not sustained media throughput.
- Form factor
- 3.5 in
- Spindle speed
- 7200 RPM
- Cache
- 512 MB
- Recording technology
- CMR
- Helium-sealed design
- Yes
- Security variant
- Self-Encrypting Drive (SED)
- Sector format options
- 512e / 4Kn
Factory default is 512e; conversion requires reformatting and does not create another model or part number.
Changing sector format deletes data. Confirm controller and operating-system support before conversion.
- Logical sector sizes
- 512 / 4096 bytes
- Factory sector format
- 512e
- Interface ports
- 1
- Super Parity
- Yes
- PowerChoice idle power management
- Yes
- PowerBalance power/performance management
- Yes
- Firmware verification
- RSA 3072
- Drive hot-plug support
- Yes
The server enclosure, controller and power connection must also support hot-plug operation. This is not a hot-plug server qualification.
- Power supply rails
- +12V / +5V
- Operating temperature limits
- 5 °C ambient minimum; 60 °C drive-reported maximum
The minimum and maximum use different measurement locations; this is not an ambient-temperature range.
- Non-operating vibration
- 2.27 Grms
2 to 500 Hz.
- Operating shock
- 40 G
2 ms read/write shock condition.
- Non-operating shock
- 200 G
2 ms shock condition.
- Maximum height
- 26.1 mm
- Maximum width
- 101.85 mm
- Maximum depth
- 147 mm
- Average rotational latency
- 4.16 ms
Installation planning
Match the drive, controller and carrier.
- Interface & sector format
- Confirm SAS or SATA, the controller and the sector format required by the array. A similar connector or matching capacity does not establish compatibility.
- Mechanical fit
- Match 2.5-inch or 3.5-inch bays, drive height and the correct carrier. Carriers and adapters are separate unless included in the quotation.
- Firmware & security
- Check any OEM firmware requirement and the exact security variant. Standard, self-encrypting and certified security variants are separate products.
- Replacement planning
- Provide the full drive label and storage-system model. Agree on whether alternatives or mixed firmware are acceptable before ordering.
Order requirements
Confirm the exact supplied variant.
- Confirm the HBA or RAID controller supports the selected capacity and sector format.
- Allow for the drive power, cooling, mounting and connection requirements.
- Self-encrypting features may require a TCG-compatible host or controller.
- Confirm the exact model, complete PN suffix, firmware and carrier requirements for the offered units.
- Changing the sector format deletes existing data. Confirm controller and operating-system support and complete your backup and change-approval process before conversion.
- This product is not automatically approved for every server of a matching brand. Confirm the target system, firmware and required accessories before ordering.
Condition & inspection
Review the actual offered units.
Media checks
Agree on the diagnostic and media-test scope. Any destructive test or sector reformat must be agreed before work begins.
Shipping
Specify individual protection, carrier requirements and lot identification. Confirm the quantity and condition on the offer.
Purchasing questions
Before confirming your order.
Does this page confirm stock or condition?
No. Your quotation will identify the available quantity, condition, included items, price and delivery arrangements.
Can I request product photographs?
Yes. Ask for current photographs of the offered unit, complete labels and packaging.
Can another part number be substituted?
Only after the proposed replacement is identified and checked against your requirements. Complete suffixes and OEM firmware requirements must be retained.
PHOTOGRAPHS THAT SUPPORT YOUR RFQ
Match the part number and physical interface.
Attach a photo brief to the request for Seagate ST12000NM001H. This is a checklist to agree, not a record that inspection has already been performed.
Label and connector views
Ask for manufacturer and OEM part numbers, front/back views and the connector or edge contacts. Capacity, interface, form factor and intended host must match the requested component.
Lot and condition
Record quantity, condition, firmware or hardware revision where relevant, plus representative and exception photographs. Avoid relying on one generic image for a mixed lot.
Protect the shipment
Request individual separation, antistatic protection and connector protection as appropriate. Show the components in trays or packing, without inventing a component-specific boot screen.
Discuss your requirements
Discuss ST12000NM001H with our parts team.
Add your required quantity, target system, acceptable condition and destination to the enquiry.
