Drive condition
Ask for the available health counters, operating hours and reported error information for the offered lot.
Seagate · Exos X18
ST10000NM014G
Manufacturer model
Seagate Exos X18 10TB SAS 12Gb/s 3.5-inch 7200 RPM CMR enterprise HDD - Self-encrypting (SED)
Product details
Technical specifications.
- Manufacturer
- Seagate
- Manufacturer model
- ST10000NM014G
- Capacity
- 10 TB
TB uses decimal capacity. Usable capacity depends on formatting and the system.
- Interface
- SAS
- Interface link rate
- 12 Gb/s
Interface link rate is not a sustained media-transfer speed.
- Form factor
- 3.5 in
- Recording technology
- CMR
- Helium-sealed design
- Yes
- Cache buffer
- 256 MB
- Spindle speed
- 7200 RPM
- Interface ports
- Dual
- Security variant
- Self-encrypting (SED)
Match the required security variant and host/controller support; confirm the offered unit and firmware before ordering.
- Supported logical sector sizes
- 512, 520, 528, 4096, 4160, 4224 bytes
Supported formats are not a statement of the offered drive's current format. Confirm controller and array requirements. Changing sector format can erase all data.
- Factory-default format
- 512e
Confirm the actual format of the offered drive, particularly used or reformatted units.
- Maximum sustained transfer rate (OD)
- 270 MB/s (258 MiB/s)
Maximum outer-diameter rating, not a guaranteed workload result. Actual transfer rates depend on operating conditions.
- Average rotational latency
- 4.16 ms
- Power supply rails
- +12 V and +5 V
Match the backplane power connector and system power requirements.
- Hot-plug capability
- Drive supports hot-plug
Hot-plug use requires a compatible enclosure, backplane and controller.
- Protection information
- T10 DIF
Requires compatible host/controller support.
Installation planning
Match the drive, controller and carrier.
- Interface & sector format
- Confirm SAS or SATA, the controller and the sector format required by the array. A similar connector or matching capacity does not establish compatibility.
- Mechanical fit
- Match 2.5-inch or 3.5-inch bays, drive height and the correct carrier. Carriers and adapters are separate unless included in the quotation.
- Firmware & security
- Check any OEM firmware requirement and the exact security variant. Standard, self-encrypting and certified security variants are separate products.
- Replacement planning
- Provide the full drive label and storage-system model. Agree on whether alternatives or mixed firmware are acceptable before ordering.
Order requirements
Confirm the exact supplied variant.
- Specify the complete Seagate manufacturer model, including every suffix character. Confirm quantity, condition, firmware and availability with the quotation.
- A Seagate manufacturer model is not a Dell, HPE, Lenovo or other OEM option/service number. Check any OEM firmware and carrier requirements separately.
- SATA and SAS variants are different products. Match the enclosure, backplane, controller, supported drive capacity and sector format.
- SED and SED-FIPS variants need the required security provisioning and suitable host/controller support. Confirm any certification requirement for the exact unit and firmware.
- A data-sheet rating does not establish the performance, health, warranty or compatibility of an offered drive. Request the actual label and relevant checks.
- This product is not automatically approved for every server of a matching brand. Confirm the target system, firmware and required accessories before ordering.
Condition & inspection
Review the actual offered units.
Media checks
Agree on the diagnostic and media-test scope. Any destructive test or sector reformat must be agreed before work begins.
Shipping
Specify individual protection, carrier requirements and lot identification. Confirm the quantity and condition on the offer.
Purchasing questions
Before confirming your order.
Does this page confirm stock or condition?
No. Your quotation will identify the available quantity, condition, included items, price and delivery arrangements.
Can I request product photographs?
Yes. Ask for current photographs of the offered unit, complete labels and packaging.
Can another part number be substituted?
Only after the proposed replacement is identified and checked against your requirements. Complete suffixes and OEM firmware requirements must be retained.
PHOTOGRAPHS THAT SUPPORT YOUR RFQ
Match the part number and physical interface.
Attach a photo brief to the request for Seagate ST10000NM014G. This is a checklist to agree, not a record that inspection has already been performed.
Label and connector views
Ask for manufacturer and OEM part numbers, front/back views and the connector or edge contacts. Capacity, interface, form factor and intended host must match the requested component.
Lot and condition
Record quantity, condition, firmware or hardware revision where relevant, plus representative and exception photographs. Avoid relying on one generic image for a mixed lot.
Protect the shipment
Request individual separation, antistatic protection and connector protection as appropriate. Show the components in trays or packing, without inventing a component-specific boot screen.
Discuss your requirements
Discuss ST10000NM014G with our parts team.
Add your required quantity, target system, acceptable condition and destination to the enquiry.
